At AimGrow, we offer organic spirulina extract powder made from Arthrospira platensis. This product is a blue, fine powder supplied for ingredient and formulation use. The overview below summarizes the typical information in our current product specification; confirm batch-specific values and intended use against current documentation.

What is this product?
| Product name | Organic Spirulina Extract (Phycocyanin Powder) |
|---|---|
| Algal source | Arthrospira platensis |
| Product identity | Phycocyanin powder |
| Country of origin | China |
| Organic status | Organic; certification documents are available on request |
What does the powder look and taste like?
- Appearance: Uniform blue powder
- Texture: Fine and loose
- Flavour: Faint seaweed flavour
- Odour: Subtle aroma characteristic of seaweed
How is it processed and checked?
According to our product specification, the powder is warm-air dried, then sifted, sterilized, blended, and packaged. Products receive routine organoleptic and microbiological analysis, including aflatoxin and ochratoxin testing. Certificates of Conformance are available on request. All products are also subject to routine metal detection.

Maximum microbiological limits
| Test | n | c | m | M | Detection method |
|---|---|---|---|---|---|
| Aerobic Plate Count (cfu/g) | 5 | 2 | <3 × 104 | 105 | GB 4789.2 |
| Coliforms | 5 | 1 | 20 | 30 | GB 4789.3 |
| Mould | — | — | <3 × 102 | — | GB 4789.15 |
| Salmonella | 5 | 0 | 0/25 g | — | GB 4789.4 |
Metal detector sensitivities listed in the specification are 2.5 mm for ferrous (Fe), 3.0 mm for non-ferrous, and 3.5 mm for stainless steel.
What nutritional information is available?
The supplied specification marks the nutritional data as not reliably established at the time of issue, while also listing the following typical values per 100 g. Treat these figures as indicative and request the current batch Certificate of Analysis (CoA) before relying on them for product development or labelling.
| Nutrient | Typical value per 100 g |
|---|---|
| Energy | 1,633 kJ / 384 kcal |
| Carbohydrate | 61.2 g |
| Fat | 0.2 g |
| Protein | 34.4 g |
| Sodium | 1,220 mg |
The product is considered suitable for vegetarians and vegans.
What packaging and shelf life are specified?
Pack formats include paper drums for packs below 5 kg and bulk packs above 5 kg. Food-grade polyethylene liners and aluminium foil liners or bags may be used, with seals such as heat sealing, cellulose tape, self-sealing closures, or cable ties depending on the pack format. Please confirm the exact configuration for your order.
Under the storage and transportation conditions specified for the product, the stated shelf life is 24 months from the date of production. Protect the powder from pests and extremes of moisture, light, and temperature, and reseal the pack after opening.
What allergen and additive information is provided?
To the best of our knowledge, the product is free from the following ingredients and derivatives:
- Bovine ingredients, milk, eggs, fish, crustaceans, molluscs, and cochineal
- Gluten, wheat, soy, peanuts, peanut oil, tree nuts, sesame, and other seeds, except the algal species stated in the specification
- Added mustard, celery, or lupin
- Artificial colours or flavourings, added natural colours or flavourings, antioxidants, MSG or other glutamates, added salt, and added sugars
- Yeast or yeast extract
- Preservatives, including benzoates and sulphur dioxide/sulphites above 10 mg/kg or 10 mg/L
Is the product organic and non-GMO?
Our specification states that the product is certified organic for the United States, European Union, and China. Current copies of the certificates are available online or on request. It also states that, to the best of our knowledge, the product is non-GMO and contains no GM processing agents, supported by organic certification and traceability/identity-preservation systems that include adequate separation.
Important specification note
This page summarizes typical product information and due-diligence sampling, assessment, and testing. The product is not completely homogeneous, so test results may not represent every portion of a batch. A specification does not confirm suitability or safety for every intended use. Customers are responsible for checking that supplied goods meet their intended-use requirements and applicable obligations. Request current batch documentation when evaluating a product.
